Thanks @Woodsman...it’s going to be my first major purchase as a new pipe smoker, but I had to scoop this one up. The 2018 pipe has that weird yellow stem, so I wasn’t as interested in it. The 2016 edition with the walnut look is pretty cool.
@ocpunk714, congratulations! That's a beautiful bulldog pipe! Was looking at a similar one at my brick & mortar shop. I have a nice collection of Peterson pipes and have never been disappointed with any of them. As @Woodsman stated, "Peterson's are good smokers."
Found this photo online and thought it would be nice to share because it is unusual.
It's an Irish estate pipe - Peterson Dublin compacting opera pipe 1914. It's a nice little vest pocket pipe for a quick smoke. To bad they are no longer in production. I would definitely add one to my collection.
@Charles -- Take a look at https://tinyurl.com/yd4jbv63 where vest pocket pipes by Comoy, Butz Choquin, and ROLEX by Brebbia are offered for sale, along with a variety of no name vest pocket pipes.
I agree Peterson's are generally very good pipes. I have three. But I've heard there's been a drop in quality and they are contracting with Briar Works in an attempt to reverse this. I'd have to agree with the drop in quality. One of mine revealed a fill after a month of smoking. Another has an odd and annoying small bump on the bowl. The third is an estate system pipe, very high quality. Anyone else had a similar experience?
I enjoy my Peterson's all of them are good smokers. I have always wanted to get a St. Patrick's Day Peterson but have been worried about the green wearing off. Your model looks nice though.
@mseddon - would answer that for me, I have not experienced any issues with Peterson pipes, other than some of the finishes wearing off, as all of mine seem to be good smokers. However, I recently purchased a Peterson Kenmare (80S) Fishtail bent bulldog from smokingpipes.com.
Was so excited and couldn't wait to receive it. Finally, when it came, I opened up the package, took out the green Peterson box, opened it, unwrapped the pipe, and took it out of it's sock. The first thing I like to do is run a pipe cleaner through to clean out any debris left from drilling and to check the air flow. The pipe cleaner would not go all the way through so I pulled out the stem to look at the mortise for any possible blockage and low and behold, the problem was that the hole was off center and would not allow passage.
I put the pipe back together and placed it back into the sock, re-wrapped the pipe and placed it back in the box and then repacked the box. I called smokingpipes.com and asked them how to go about returning the pipe and why I wanted to return it. They understood and were very helpful with the return process. Smokingpipes.com also stated that offset holes were common with bent Peterson pipes but not with their straight pipes. But still, I was very disappointed and was looking forward to that bent bulldog, but this was my first issue with Peterson.
@motie2 The 4AB article is a good read, too bad the pipes are limited edition expensive. I'm happy I like an open draw an can't drill a bent stem!. I love the look and feel of my 2021 Christmas Lestrade but know it's going to bite my tongue.
Comments
It's an Irish estate pipe - Peterson Dublin compacting opera pipe 1914.
It's a nice little vest pocket pipe for a quick smoke. To bad they are no longer in production. I would definitely add one to my collection.
@Charles that estate pipe looks so rad. Does the description say it’s a refurbished or rebuilt or is that the original condition?
Love how you rock the hat to hold your pipe. That pic was cool.
Peterson Pre-Republic P-Lips are my favorite production pipes to collect!
That is a great looking bulldog ocpunk, I hope it turns out to be one of your best smokers!
@judandhispipe Try looking for a Peterson 999. It's a bent Rhodesian with a nice shape to it. A perfect pipe to clench.
Was so excited and couldn't wait to receive it. Finally, when it came, I opened up the package, took out the green Peterson box, opened it, unwrapped the pipe, and took it out of it's sock. The first thing I like to do is run a pipe cleaner through to clean out any debris left from drilling and to check the air flow. The pipe cleaner would not go all the way through so I pulled out the stem to look at the mortise for any possible blockage and low and behold, the problem was that the hole was off center and would not allow passage.
I put the pipe back together and placed it back into the sock, re-wrapped the pipe and placed it back in the box and then repacked the box. I called smokingpipes.com and asked them how to go about returning the pipe and why I wanted to return it. They understood and were very helpful with the return process. Smokingpipes.com also stated that offset holes were common with bent Peterson pipes but not with their straight pipes. But still, I was very disappointed and was looking forward to that bent bulldog, but this was my first issue with Peterson.
https://www.smokingpipes.com/smokingpipesblog/single.cfm/post/top-best-selling-peterson-pipes
Mail call. Made in Ireland in a circle places the pipe between 1942-1946. There is just enough silvermark left to narrow in on 1942.
The 2021 Release of Peterson Christmas Pipes
The Pipe of the Year 2021—The Return of Basil Rathbone’s 4AB
The 4AB article is a good read, too bad the pipes are limited edition expensive. I'm happy I like an open draw an can't drill a bent stem!. I love the look and feel of my 2021 Christmas Lestrade but know it's going to bite my tongue.